Thursday, July 15, 2010

The truth about Lacquered Walls


 
Photo by Doreen Dierckx in Wall Effects by Katie Ebben

A lacquered wall = elegance, depth, reflection. Seen from the side angle, the light reflects right off of it. Seen from the front, its layers draw you in. There is nothing quite like it. 


 

 
 
Photo by Eric Laignel in Color at Home by Meg and Steven Roberts

In the past few years, we have seen an increasing number of lacquered walls in the design /decor magazines and interior designer websites. I, for one, have wall envy when I see one. Catherine Hopkins over at The Shiny Pebble just expressed her wish to re-do her home office walls in a teal-ish shade of blue.  Let's see what she will need to do. 

 

With a lacquered wall, the surface prep's importance cannot be overstated. 

First, the walls need to be examined closely, preferably with a bright light or two to illuminate the defects. Any dings, nail holes, etc. first need to be filled in. Look at the wallboard seams- can you see them? Can you see the tape that was placed on top of them before painting?  If the answer is yes or if you are starting out with walls that are often referred to as "orange peel", as they frequently are in the south and west, the walls will definitely need to be skim-coated. This means that one or two layers of joint compound or Venetian plaster or a similar texture are troweled on to create a smooth surface. This would then be sealed with a primer / sealer.

          Paint and Color in Decoration  by Farrow and Ball

 Look closely above the portrait. If your wall prep is not perfect, this is what you'll see throughout.


Sanding between coats and after the final coat is key. (Don't forget- after sanding, you always have to wipe off those areas with a slightly damp cloth to remove the accumulated dust. Otherwise, the next paint layer does not get a good grip and stick properly. Unfortunately, you won't find that out until later- it's not a pretty picture.) The smoother the walls are, the better your wall will look.

Now that is smooth!   
Photo by Simon Upton in Paint & Paper by David Oliver

 To obtain the smoothest finish possible, the paint layers should be sprayed on. Rollers, even the smoothest sponge rollers, will leave a dimpled appearance. At least two paint layers, if not three or more, will be necessary. Oil paint is preferred because of its leveling-out qualities, but oil paints are banned in many states. An excellent quality of a high gloss paint would then be used. With sanding in between for a fluid finish.

Beautiful!         credit

Can you see the difference between spraying, as in the photo above, and this photo below, which appears to have been rolled?


Photo by Eric Laignel in Color at Home by Meg and Steven Roberts

The topcoat layers should also be sprayed. The topcoat of choice is a decision that needs to be made. Years ago, the "real" lacquer, made from lac, a deposit left by the Cocca lacca insect and harvested from the orishi tree in Japan and China, would be used. Because of its poisonous qualities, it is no longer used in most areas. Shellac is now used, usually prepared by the professional using shellac flakes and denatured alcohol. While it is beautiful, it is difficult to work with as it dries quickly, making it challenging on the large vertical surface. An acrylic, water-borne varnish can be used and is preferable for its anti-yellowing nature. A minimum of three, and up to six or seven, sprayed-on layers with wet-sanding several times in between will complete the finish.  


Photo by Eric Laignel in Color at Home by Meg and Steven Roberts

To view a spectacular lacquered wall with a damask pattern on top of the paint, see here.

Whew! It's truly an undertaking. Really not a project to take on without lots of previous painting experience. And you must have plenty of time for each of the layers to thoroughly dry before applying the next layer. No wonder it is expensive to do! It is even more labor intensive than a lime Venetian plaster, as seen below. The mottled look of the plaster gives it away.

 
Photo by Ken Hayden in Paint & Paper by David Oliver

Both demand to be touched and admired!

One of Catherine's readers was thinking about adding gloss stripes to a matte wall to liven things up in a subtle manner. This tone-on-tone look would be accomplished by painting the entire wall in a matte paint color and then filling in the "stripe" with the same color in a gloss finish. Here is a similar idea, using a stencil pattern instead.

 
Wall Effects by Katie Ebben

I couldn't resist including this photo of one excellent lacquer finish on this table!

Photo by William Waldron in New American Glamour by Jamie Drake

Have you lacquered your walls? If so, we would love to hear about your experiences. Do tell!

And now for a tiny garden update. I've not had time to photograph the lilies in full bloom, except for the Casa Blanca Oriental lily in the front. But what a lily it is!

Caught on my way to the gym! It is taller than I am.

 Thank you, Cindy, at My Romantic Home for Show & Tell Friday. 

5 comments:

  1. Love this post! I absolutely love, love, love lacquered walls, although I don't have any. I do second your advice about having the walls prepped beyond belief. Every single imperfection will show if it isn't like butter! I haven't done any lacquered walls for clients, but I have done some semi-gloss where the walls needed a lot of "fine tuning" to make them look spectacular.

    ReplyDelete
  2. The sunburst mirror picture is one to ponder on for sure, love-love it! I did the same color, different sheen stripes on a wall between our kitchen and living room. Turned out really nice and people always comment on it. Your detailed explanation of lacquering is so great. Good for you and your lilies...and going to the gym!

    ReplyDelete
  3. Ann, this is a fantastic post. I love the images you picked. They clearly demonstrate your point. I wish you lived here so I would definitely have you do it. After I sold my first born, that is!!! (which in my case, it is my dog tuco!)

    ReplyDelete
  4. What a great post! I read every word and it is so true. I had a designer ask for a French Polish on cabinetry -- she wanted a similar finish like on pianos. We submitted a quote and she could not believe the prepwork involved [a different finish was picked :(]. Careful attention to the process is a must. All your images are amazing!

    ReplyDelete
  5. Great post, but to my knowledge there is still no ban on oil-based paint as of April 2012. There are VOC regulations, but oil-based paints and primers are still available in most areas. I can't say they are universally available, but the ban seems to be a slight misinterpretation of the VOC regs. Most of those apply to industrial applications, and not to homeowners. I have seen some beautiful walls like these done in white, but be aware that white and some other pale colors of oil-based paint turn yellow after about a year. The yellowing is uneven, as the hue is the oil in the paint bleeding out, for lack of a better way of putting it. The more color in the paint, the better. Every window in my 121-y/o Victorian has to be repainted because the white oil-based paint has yellowed badly.

    ReplyDelete